Features

• ►[(2023 Newest)Bright Rechargeable Pool Lights] :The rechargeable ubmersible pool lights will be brighter than the lights powered by AA or AAA batteries, and there is no need to replace the battery frequently, no need to pay extra for the battery, saving and environmental protection.It can be quickly charged through the universal USB-C charging cable, and it only takes 3-4 hours to fully charge.
• ►[IP68 Submersible Lights with Magnets and glues]: Fully sealed structure, safe and waterproof.The lights has a built-in super strong magnet, which is not easy to rust, and can be adsorbed on any iron metal surface, which is super firm and not easy to fall off.We adopt a new way of glue installation, you can install the underwater LED light even if under water! Whether it is a smooth or a bumpy surface, this pool lights are applicable.The glue is safe, harmless, and environmentally friendly.
• ► [16 Colors, Multi Options, Dimmable Pool Light Underwater]: Optimized 16 dynamic colors, multiple modes(flash, fade, smooth), in modes, the Brightness button can be used to adjust the speed.increased 3 timer button (2h, 4h, 6h), 5 brightness adjustable levels, you can control the light with the button on the bottom of the light.give you more choices, and create more beautiful atmosphere.
• ► [MAX 200FT/50M RF Remote Range]: LOFTEK underwater lights with RF remote have further and deeper remote range to 200ft/50m in air, 16.4ft/5m in water. IR remote can only control within 2ft, one remote can control multiple lights, no need aim at the lights. Notice: pool water would largely absorb signal, please get closer to control lights within 16.4ft/5m (include water and air distance).
• ►[After-sale Guarantee]: 45 days free return and quickly unconditional refund; 2 yeas free replacement for product quality issue; Lifetime prompt customer service. Please note: Product may be occasionally damaged during transportation. Please feel free to contact us. Lights with tiny volume, they could be used in any decor occasion without any limitation of imagination, inflatable pool light, tub light, fountain light,fish tank light, aquarium light, garden light and more.

INSTALLATION STEPS USING GLUE

1. Choose a suitable location under water, wipe off the dirt, moss.

2. Apply glue to the base plate part of the bottom plate.

3. You need to press and hold for more than 90S, and you must ensure that the plate is fixed.

4. After 60-120 minutes, after confirming that the base plate is stable, align the installation point and install the lamp.

NOTE:Please wait 1-3 hours before swimming after attaching the base plate (to reduce the impact of water flow on the bottom plate) to make it stick more firmly.

TIPS FOR REMOTE CONTROL AND TIMER OPTION

1. Please remove the plastic insulating film on the bottom of remote before using it, and keep the remote dry, because it's not waterproof.

2. Because our remote is radio frequency, so it may be disturbed by the signal nearby, please try to turn off other signal source nearby or keep closer to the lights.

3. For underwater using, please keep the remote within10FT/3M-16.4FT/5M, because water will largely absorb signal, and weaken the signal to the lights.

4. In air, the remote range can reach 164FT/50M and more.

5. Press the 2H button, and the indicator light flash red three times, indicating that the setting is successful for 2 hours, and the LED light will be turned off after 2 hours;

6. Press the 4H button, and the indicator will flash green three times, indicating that the setting is successful for 4 hours, and the LED will turn off after 4 hours;

7. Press the 6H button, the indicator will flash three times blue, indicating that the setting is successful for 6 hours, and the LED will turn off after 6 hours;

8. Press TIME OFF button, the indicator flashes three times white light, indicating that the timing cancellation is successful; The LED will stay on until the battery is dead or the power is turned off.

9.The product has no circulation function and will not open automatically.

TIPS FOR CHECKING POWER

1. The battery is low, the light is weak, and it needs to be charged. The red light is red during charging, and the green light is full.

2. During the first use, press ON OFF at the bottom of the product to activate, and the remote control can be used normally after activation.

3. Check the remote control battery: when you press the remote control, you will see a red light on, if you can't see it, it means the remote control is powered off or not working, please remove the plastic film or replace with a new battery.

4. If the product is not used for a long time, please press the remote control red button for about 5 seconds, and the product will sleep mode to maintain the service life of the battery; At this time, if the product will be turned on, you can only activate it by pressing ON OFF at the bottom of the product. The remote control can only be used normally after activation

TIPS FOR MAGNETS AND GLUE

1. lt’s perfect for any iron place which can be attracted by magnet, especially rough vertical surface, but not for smooth vertical surface.

2. The magnet is strong, but it’s better to apply on pure iron surface, alloy may reduce the absorb effect.

3.The best bonding effect is the glue on the adhesive surface of the object to form a layer of film, the amount used should not be too much.

4.It should be stored in a dry and cool place, away from heat source and open flame.

5. Avoid superglue contact with skin, please use safety gloves and protective glasses,If the glue sticks to the skin, wash it well with soap,If it gets into the eyes, please wash with water and seek medical attention immediately.

PLEASE NOTE

1. Please keep the remote dry from water, because it's not waterproof, water will make it stop working.

2. This glue is a strong glue, which is harmful to the skin, please keep it properly and avoid letting children touch it!

3. To protect your eyes, try to avoid looking directly at the bulb.

4. please check whether the charging port is clean and dry before charging.

5.After receiving the product, please charge it first.

6. For underwater using, please keep the remote within 10FT/3M-16.4FT/5M, because water will largely absorb signal, and weaken the signal to the lights.

7. Be sure to close the cap that seals the charging port before placing the light in water.